Scion Technology & Communications Limited
PRO-6000 - FAQ
Copyright Scion Technology & Communications Ltd
Tel: +44 (0) 118 9817 151
Fax: +44 (0) 118 9817 575
Mail: sales@sciontech.com
PRO-6000 Series
Q1
Is the PRO-6000 suitable for my home and will it allow me to control any set top box?
A1
Yes, the product was designed with the home and small office environment in mind. When installed, the system will give you
complete control of all your media devices from any one of the six zones.
complete control of all your media devices from any one of the six zones.
Q2
Is there a restriction on cable type and length?
A2
All Scion products are designed to work over CAT5, CAT5e and CAT6 cable. The PRO-6000 is capable of sending high quality
composite video and stereo audio over 300m.
composite video and stereo audio over 300m.
Q3
Will the Scion IR remote control all my televisions?
A3
The PRO-0201 remote is pre-programmed to control all Scion matrix systems and has an internal library for controlling the volume,
mute and standby functions of most televisions, plasma and LCD displays. This library is available for download in the "download"
section of this web site.
mute and standby functions of most televisions, plasma and LCD displays. This library is available for download in the "download"
section of this web site.
Q4
Will the PRO-6000 route the IR commands to individual set top boxes if there are two or more of the same installed?
A4
Infra-Red commands are presented on two 3.5mm jack sockets. These accept two dual IR emitters for sticking on to your set top
boxes. When a command is sent from a zone all four emitters will pass the IR command, therefore controlling all your devices.
To prevent this happening a PRO-6070 can be installed. This will route the IR command to the specific device and prevent clashes
between devices.
boxes. When a command is sent from a zone all four emitters will pass the IR command, therefore controlling all your devices.
To prevent this happening a PRO-
between devices.
Q5
Can I pass CCTV video through the PRO-6000?
A5
Yes, there are two inputs dedicated to CCTV signals. There are a total of 13 inputs on the PRO-6000, all of which can be used for
CCTV. In most installations a video quad splitter is used with the output feeding the PRO-6000.
CCTV. In most installations a video quad splitter is used with the output feeding the PRO-
Q6
Can I use other manufacturers remote control handsets with the PRO-6000?
A6
The PRO-6000 uses standard RC5 IR codes and therefore can be replaced with most manufacturers handsets. There are three
separate codes programmed in to the PRO-6000 giving you the option should you experience IR clashes with third party products.
Details for changing this code can be found in the operational handbook.
separate codes programmed in to the PRO-
Details for changing this code can be found in the operational handbook.
Q7
Will Scion install the PRO-6000 system?
A7
Scion Technology Ltd is a design and manufacturing company and uses distributors and installers for it's products. If you would
like a system installed, please visit our "distributors" section of this web site to find your local dealer.
like a system installed, please visit our "distributors" section of this web site to find your local dealer.
PRO-6000
6 Zone
PRO-6000A
6 Zone + local
switched audio
switched audio
PRO-6000B
6 Zone + IR
routing
routing
PRO-6094
4 Zone DA
PRO-6098
8 Zone DA
PRO-6021
Scart to Scart
PRO-6024
Scart to Phono
PRO-6051
Phono to Scart
PRO-6054
Phono to Phono