Scion Technology & Communications Limited
Compact 10” enclosure
Capable of routing 6 Infra-Red commands to 8 set top boxes
Connects directly to the PRO-6000
Management software for IR Matrix
8 Port Infra-Red router
General Description
The PRO-6070 has been designed to be used in conjunction with the PRO-6000 TV switch system. If a number of similar
devises are used on the PRO-6000 switch without the PRO-6070 they will all change channel at the same time.
devises are used on the PRO-
The PRO-6070 linked to the PRO-6000 will allow you to control these devices individually, without interface to other devices.
For example if an installation has two sky boxes; the sky boxes use the same IR codes, changing channel on one will effect
the other if the PRO-6070 is not being used. This is also very common with free to Air terrestrial boxes as a number of these
can be used depending on requirements of the Client.
For example if an installation has two sky boxes; the sky boxes use the same IR codes, changing channel on one will effect
the other if the PRO-
can be used depending on requirements of the Client.
Two units can also be linked together, the linking of the units either from the PRO-6000 or two PRO-6070's is printed very
clearly on the front of the panel. Simple leads loop from one to the other, there is no programming to do, just simply loop
them together. You can if you wish to use the server software that Scion provides for the PRO-6000 system to manage the
IR control. For example if you do not wish certain rooms to have control over a device, they can be blocked, this function is
explained in the software manual, along with many other features. The rear of the PRO-6070 has 8 IR emitter ports, the single
IR emitters are stuck over the IR eye on the front of the devices you wish to control, and the jack plug is then inserted in the
relative connecter on the rear of the unit. (No 1 being device 1)
clearly on the front of the panel. Simple leads loop from one to the other, there is no programming to do, just simply loop
them together. You can if you wish to use the server software that Scion provides for the PRO-
IR control. For example if you do not wish certain rooms to have control over a device, they can be blocked, this function is
explained in the software manual, along with many other features. The rear of the PRO-
IR emitters are stuck over the IR eye on the front of the devices you wish to control, and the jack plug is then inserted in the
relative connecter on the rear of the unit. (No 1 being device 1)
One PRO-6070 will allow you to control eight devices from your remote location through the PRO-6000 switch system.
Power is required for the PRO-6070 and the unit is supplied with the relative power supply.
Power is required for the PRO-
Receivers & Control
PRO-0201
PRO-6001
PRO-6004
Copyright Scion Technology & Communications Ltd
Tel: +44 (0) 118 9817 151
Fax: +44 (0) 118 9817 575
Mail: sales@sciontech.com
PRO-6070
PRO-6063
PRO-6012
PRO-6007
PRO-6060
